web analytics
Skip to content

SPEARS LOCKABLE PVC BALL VALVES

Spears PVC industrial PVC ball vave

SPEARS® 2000 SERIES INDUSTRIAL BALL VALVE. 16 BAR PRESSURE RATED, DOUBLE UNION CONSTRUCTION.

  • Chemical & Corrosion Resistant PVC or CPVC Construction.

  • Also Available in Spears® High Purity, Low Extractable PVC Material.

  • Interchangeable with all True Union 2000 Valves. Mates with Union 2000 Pipe Unions.

  • Valves are available in IPS sizes 1/2″ through 2″ (DN15 through DN50) with ASTM (Schedule 80) socket & NPT threaded ends as standard. BSP threaded ends are available if requested at time of order.

  • SR threaded (Special Reinforced), flanged or spigot end connectors are available at additional cost.

  • Schedule 80 Full-Bore Design.

  • Strong, Buttress Thread Union Nuts.

  • Spears® Single O-ring Safe-T-Shear® Stem Design.

  • Spears® Safe-T-Blocked® Seal Carrier.

  • Self Adjusting PTFE Floating Seat Design.

  • EPDM or Viton® O-rings.

  • Sizes 1/2″ – 2″ (DN15-DN100) pressure rated to 235 psi (16Bar) @ 73° F (23°C).

  • All flanged valves pressure rated to 150 psi (10Bar) @ 73° F (23°C).

  • EPDM valves NSF Certified for Potable Water use.

  • Suitable for Vacuum Service.

  • Assembled with Silicone-Free, Water Soluble Lubricants.

  • Fully Serviceable, Replaceable Components.

  • Manufactured to ASTM F 1970. in USA.

 

Optional Vented Ball Valves.

Same valve with special ball vent design for
sodium hypochlorite (bleach) and other chemical
applications where entrapped fluids may form
caustic crystalline residues and pressure build up
from gases developed. Valve has a 1/8″ vent hole
in ball to equalize internal fluid pressures. Install
valve with ball vent on the pressure (upstream)
side when in closed position.

Optional Accessories

Retro-Fit End Connector Sets for Valve Replacement
Split-Nut Repair Kits for Union Nut Replacement
Supplemental End Connectors
Round Safety Handles
Handle Lockout Ring
Stem Extension Kits
Square Operator Nuts
Multi Mount Valve/Actuation Mounting Kits
Mini-Mount Actuation Mounting Kits

VALVE SELECTION CHART

Industrial ball valve selection chart

1) For CPVC, add the letter “C” following the size code of part number listed (e.g.,1829-005C, 1821-005CSR)
2) For Special Ball Vent Design, add the letter “V” before the dash separator (e.g.,1829V-005, 1821V-005CSR)
3) 8″ Venturied Valves are 6″ ball valves fitted with 6×8 end connector adapters.

DIMENSIONS

Industrial ball valve dimensions

Industrial ball valve dimensions table

 

 

PRESSURE v TEMERATURE RATING

CONTACT US FOR PRICES & APPLICATION ADVICE

SPEARS STANDARD BALL VALVE

PRODUCT MENUS

Schedule 80 UPVC & CPVC Industrial Pipe & Fittings
PVC & CPVC SCHEDULE 80 INDUSTRIAL PIPE & FITTINGS MENU
PVCU & CPVC Manual Valves
PVC & CPVC MANUAL VALVES MENU
Actuated valves menu
MERCON ACTUATED VALVE MENU
Instrumentation menu
INSTRUMENTATION PRODUCT MENU
Chemical dosing accessories menu
MERCON DOSING ACCESSORIES MENU
Over Stock Clearance Specials
STOCK CLEARANCE SPECIALS MENU